Single-Stage Solid-State Transformer for High-Density Data-Centre Power Conversion

Project Overview

As part of the Global Connect Fellowship at Nanyang Technological University (NTU), this research project investigated a single-stage Solid-State Transformer (SST) architecture for high-density data-centre power conversion. The work was conducted under the supervision of Assoc. Prof. Tang Yi at the School of Electrical and Electronic Engineering.

The project focused on developing a modular SST topology for direct medium-voltage AC to low-voltage DC power delivery, targeting the increasing power density requirements of next-generation data centres and AI computing infrastructure.

Challenge

The rapid growth of AI and GPU-based computing is driving a significant increase in data-centre power consumption and power density. Conventional data-centre power architectures typically rely on multiple conversion stages, such as AC–DC followed by DC–DC conversion, which can introduce additional conversion losses, increase system footprint, and limit the achievable power density.

This creates a need for a more compact and efficient power-conversion architecture capable of handling high power levels while maintaining scalability and modularity.

Proposed Approach

I investigated a modular single-stage SST architecture that combines medium-voltage AC conversion and isolated DC conversion within a single power-conversion stage. The proposed system was designed for 20 kV MVAC to 800 VDC power delivery and consists of multiple SST cells distributed across the three phases.

The proposed architecture targets a 1 MW, 100 kHz SST system with 12 cells per phase, enabling the overall power-conversion system to be scaled through modular cell configurations.

Single-Stage SST Architecture

Figure 1. Proposed SST architecture.

Simulation & Technical Evaluation

I utilized and modified existing PLECS simulation models based on the topology presented in [1] to evaluate the proposed SST architecture under different operating conditions. The models were adjusted to suit the proposed system configuration and assess its performance for high-density data-centre applications.

The simulation study focused on:

  • Converter efficiency under different loading conditions.
  • Power density and the potential for reducing the footprint of the power-conversion system.
  • Dynamic performance during varying load conditions.
  • Modular operation of the SST cells and their contribution to system scalability.
Global Connect Fellowship Research Poster

Figure 2. Research poster.

Key Outcomes

The study demonstrated the potential of a modular single-stage SST as a high-density power-conversion architecture for next-generation data centres. By integrating the conversion stages into a single SST cell and using a modular structure, the proposed approach provides a pathway toward high-power, scalable, and compact MVAC–800 VDC conversion.

Reference

[1] B. P. Do, M. Gerado Geda, H. -P. Kieu, and S. Choi, “A Half-Bridge Single-Stage AC–DC Converter With Single- and Three-Phase Compatibility,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 13, no. 6, pp. 8051–8061, Dec. 2025, doi: 10.1109/JESTPE.2025.3616602.