SST System-Level Integration & Coordination Design
Project Overview
As part of the Universitas Gadjah Mada – PT PLN (Persero) Collaboration, this project focused on the high-level integration of a Solid-State Transformer (SST). The work involved designing the startup procedures and coordination logic for the three conversion stages: the MMC rectifier, the Dual-Active Bridge (DAB), and the MMC inverter.
Core Contributions & Technical Execution
1. Multi-Stage Startup Design
- The Challenge: Startup algorithms were required to prevent inrush currents for each individual converter and ensure a stable transition to full-system operation.
- My Execution: I designed and validated the following algorithms in PLECS:
- MMC Rectifier: Designed the algorithm to precharge sub-module capacitors [1] in collaboration with teammate Ariq Naufal Fakri Wiratno.
- DAB Startup: Developed a soft-start algorithm by ramping up the phase shift [2] to ensure stable power transfer.
- MMC Inverter: Designed the algorithm to precharge sub-module capacitors [1] for stable grid/load integration.

Figure 1. MMC rectifier with startup algorithm.

Figure 2. DAB with startup algorithm.

Figure 3. MMC inverter with startup algorithm.
2. SST System Coordination
- The Challenge: The integrated SST requires configuration scenarios to ensure the MMC rectifier, DAB, and MMC inverter stages interface and synchronize correctly during operation.
- My Execution: I designed the master coordination framework for the SST system by developing logic-driven operational scenarios in PLECS.

Figure 4. Master control implementation for the integrated SST system.

Figure 5. MMC rectifier stage result (integrated SST simulation).

Figure 6. DAB stage result (integrated SST simulation).

Figure 7. MMC inverter stage result (integrated SST simulation).
References
[1] L. Zhang, J. Qin, X. Wu, S. Debnath and M. Saeedifard, “A Generalized Precharging Strategy for Soft Startup Process of the Modular Multilevel Converter-Based HVDC Systems,” in IEEE Transactions on Industry Applications, vol. 53, no. 6, pp. 5645-5657, Nov.-Dec. 2017, doi: 10.1109/TIA.2017.2736958.
[2] F. Giuliani, N. Delmonte, P. Cova, A. Costabeber and A. Castellazzi, “Soft-starting procedure for dual active bridge converter,” 2015 IEEE 16th Workshop on Control and Modeling for Power Electronics (COMPEL), Vancouver, BC, Canada, 2015, pp. 1-6, doi: 10.1109/COMPEL.2015.7236516.
